TE / Raychem Heat Shrink / Cable Markers Yellow (250pc) - TMS-SCE-1-2.0-4
|Product Category:||Wire Identification|
|Brand:||TE Connectivity / Raychem|
|Type:||Heat Shrinkable Wire Identification Sleeves, Military Grade|
|Product:||Labels, Heat Shrinkable|
|Features:||3:1 Shrink Ratio|
|Factory Pack Quantity:||250|
|Temperature Range:||- 55 C to + 135 C|
TMS-SCE marker sleeves are designed to meet the wire and cable marking needs of manufacturers with high performance requirements. Made from durable, flame retarded, radiation-crosslinked heat-shrinkable polyolefin,
TMS-SCE marker sleeves can be used in a wide variety of applications. The marker sleeves meet the performance requirements of SAE-AMS- DTL-23053/5 classes 1 and 3 and the TMS-SCE-2X products are made from tubing fully compliant with this specification.
The marks are permanent immediately after printing and remain legible even
when exposed to abrasion, aggressive cleaning solvents, and military fuels and oils. The sleeves meet the mark permanence requirements of SAE AS81531 4.6.2 and MIL-STD-202F both before and after shrinking.
The marker sleeves are designed to be printed by computer-driven dot matrix or thermal transfer printers, providing several advantages in terms of reduced errors, cycle time and cost.
Features and benefits
Supplied in a thin, flat “ladder” format, the sleeves are held horizontally between two hole-punched polyester strips. This configuration feeds directly from the storage box into a Tyco Electronics-recommended printer.
Tyco Electronics-recommended ribbons should always be used. The ladder format provides automatic kitting of the marker sleeves in the desired sequence. A standard heat gun with reflector is used to shrink the sleeves onto the wire or cable.
Permanent identification sleeves.
Lightweight for aerospace applications.
Military specification material and print performance.
2:1 and 3:1 shrink ratio.
UL Recognized, VW all flame tubing test rated.
Quick recovery for heat sensitive areas.
Operating temperature range: – 55°C to +135°C
Minimum recovery temperature: +85°C
Maximum storage temperature: +40°C
TE : RW-2511
SAE-AMS-DTL-23053/5 classes1 and 3,
SAE-AS81531 4.6.2, MIL-STD-202F Method 215J
UL Recognized – Standard 224, file E35586
CSA Certified – File 31929
Tyco Electronics printer
AM6310 (dot matrix)
T200 Series (thermal transfer, low volume)
T312M (thermal transfer)
Tyco Electronics Ribbon.
1892BK04-RIBBON (dot matrix)
TMS-101-RIBBON-4RPSCE (thermal transfer for T208M)
TMS-RJS-RIBBON-4RPSCE (thermal transfer for T312M)